93LC46/P Microchip Technology IC EEPROM 1KBIT 1MHZ 8DIP
Інтэгральныя схемы (ІС)
Нумар вытворцы:
93LC46/P
Вытворца:
Катэгорыя прадукцыі:
Апісанне:
IC EEPROM 1KBIT 1MHZ 8DIP
Стан RoHs:
Без свінцу / у адпаведнасці з RoHS Табліцы дадзеных:
93LC46/P Табліцы дадзеных(PDF)
Інтэрфейс памяці :
SPI
Напружанне - сілкаванне :
2.5 V ~ 5.5 V
Пакет / Чахол :
8-DIP (0.300", 7.62mm)
Пакет прылады пастаўшчыка :
8-PDIP
Памер памяці :
1Kb (128 x 8, 64 x 16)
Працоўная тэмпература :
0°C ~ 70°C (TA)
серыял :
-
Тактавая частата :
2MHz
Тып мацавання :
Through Hole
Тып памяці :
Non-Volatile
Тэхналогія :
EEPROM
Ўпакоўка :
Tube
Фармат памяці :
EEPROM
Час доступу :
-
Час цыкла запісу - слова, старонка :
10ms
Частка Статус :
Active
в наличии
14,905
Unit Price:
Звяжыцеся з намі Прапанова
93LC46/P Канкурэнтныя кошты
ChipIc мае унікальную крыніцу паставак. Мы можам прапанаваць 93LC46/P больш
канкурэнтаздольную цану для нашых кліентаў. Вы можаце атрымаць асалоду ад нашым лепшым
сэрвісам, купіўшы ChipIc 93LC46/P. Калі ласка, не саромейцеся звяртацца наконт
лепшай цаны на 93LC46/P. Націсніце, каб атрымаць прапанову
93LC46/P Асаблівасці
93LC46/P is produced by Microchip Technology, belongs to аб'ём памяці.
93LC46/P Падрабязная інфармацыя аб прадукцыі
:
93LC46/P - гэта аб'ём памяці, буферныя ўзмацняльнікі, распрацаваныя і
вырабленыя
Microchip Technology.
93LC46/P вытворчасці Microchip Technology можна набыць на сайце Chipic.
Тут вы можаце знайсці розныя віды электронных дэталяў ад вядучых вытворцаў свету.
93LC46/P кампаніі Chipic прайшоў строгі кантроль якасці і адпавядае усім патрабаванням.
Статус запасаў, пазначаны на Chipic, прызначаны толькі для даведкі.
Калі вы не знайшлі запчастку, якую шукаеце, вы можаце звязацца з намі для атрымання дадатковай інфармацыі, такі як колькасць запасаў у табліцы дадзеных 93LC46/P (PDF), кошт 93LC46/P, Распіноўка 93LC46/P, кіраўніцтва 93LC46/P і рашэнне на замену 93LC46/P.
93LC46/P вытворчасці Microchip Technology можна набыць на сайце Chipic.
Тут вы можаце знайсці розныя віды электронных дэталяў ад вядучых вытворцаў свету.
93LC46/P кампаніі Chipic прайшоў строгі кантроль якасці і адпавядае усім патрабаванням.
Статус запасаў, пазначаны на Chipic, прызначаны толькі для даведкі.
Калі вы не знайшлі запчастку, якую шукаеце, вы можаце звязацца з намі для атрымання дадатковай інфармацыі, такі як колькасць запасаў у табліцы дадзеных 93LC46/P (PDF), кошт 93LC46/P, Распіноўка 93LC46/P, кіраўніцтва 93LC46/P і рашэнне на замену 93LC46/P.
93LC46/P FAQ
:
1. What is the function of the 93LC46/P semiconductor?
The 93LC46/P semiconductor is a 1K-bit low-voltage serial electrically erasable programmable read-only memory (EEPROM) device. It is commonly used for storing small amounts of non-volatile data in various electronic applications.
2. What are the key features of the 93LC46/P semiconductor?
The 93LC46/P semiconductor features a wide operating voltage range, low power consumption, and a simple two-wire serial interface. Additionally, it offers a high-speed clock frequency and a dedicated write protect pin for added security.
3. How is the 93LC46/P semiconductor typically connected in a circuit?
The 93LC46/P semiconductor is usually connected to a microcontroller or other digital device using a simple two-wire serial interface, consisting of a clock line and a data line. Additionally, it requires connections for power and ground, as well as a write protect pin if needed.
4. What are the typical applications of the 93LC46/P semiconductor?
The 93LC46/P semiconductor is commonly used in applications requiring small amounts of non-volatile memory, such as storing configuration data, calibration values, or user settings in various electronic devices including consumer electronics, automotive systems, and industrial equipment.
5. What are the main advantages of using the 93LC46/P semiconductor in a design?
The 93LC46/P semiconductor offers advantages such as low power consumption, small form factor, ease of integration with microcontrollers, and reliable non-volatile data storage. Its simple two-wire serial interface also simplifies the design of the overall system.
6. How does the 93LC46/P semiconductor handle data retention and endurance?
The 93LC46/P semiconductor is designed to retain data for an extended period without requiring power. Additionally, it has a high endurance for read and write cycles, making it suitable for frequent data updates in various applications.
7. What are the typical operating conditions for the 93LC46/P semiconductor?
The 93LC46/P semiconductor operates within a specified voltage range, typically from 2.5V to 5.5V, and at a recommended temperature range. It is important to adhere to these operating conditions to ensure proper functionality and reliability.
8. Can the 93LC46/P semiconductor be used in automotive applications?
Yes, the 93LC46/P semiconductor is suitable for use in automotive applications, provided that it meets the required specifications for temperature, voltage, and environmental conditions. Its small form factor and low power consumption make it well-suited for automotive electronics.
9. How can the 93LC46/P semiconductor be programmed and erased?
The 93LC46/P semiconductor can be programmed and erased using a simple two-wire serial interface, which allows for easy integration with microcontrollers or other digital devices. Specific commands and protocols are used to write, read, and erase data in the semiconductor.
10. Are there any special considerations for PCB layout when using the 93LC46/P semiconductor?
When designing the PCB layout for the 93LC46/P semiconductor, it is important to consider signal integrity, power supply decoupling, and proper routing of the serial interface lines to minimize noise and interference. Additionally, attention should be given to the placement of the semiconductor within the overall system for optimal performance.
I hope this information is helpful to you.
The 93LC46/P semiconductor is a 1K-bit low-voltage serial electrically erasable programmable read-only memory (EEPROM) device. It is commonly used for storing small amounts of non-volatile data in various electronic applications.
2. What are the key features of the 93LC46/P semiconductor?
The 93LC46/P semiconductor features a wide operating voltage range, low power consumption, and a simple two-wire serial interface. Additionally, it offers a high-speed clock frequency and a dedicated write protect pin for added security.
3. How is the 93LC46/P semiconductor typically connected in a circuit?
The 93LC46/P semiconductor is usually connected to a microcontroller or other digital device using a simple two-wire serial interface, consisting of a clock line and a data line. Additionally, it requires connections for power and ground, as well as a write protect pin if needed.
4. What are the typical applications of the 93LC46/P semiconductor?
The 93LC46/P semiconductor is commonly used in applications requiring small amounts of non-volatile memory, such as storing configuration data, calibration values, or user settings in various electronic devices including consumer electronics, automotive systems, and industrial equipment.
5. What are the main advantages of using the 93LC46/P semiconductor in a design?
The 93LC46/P semiconductor offers advantages such as low power consumption, small form factor, ease of integration with microcontrollers, and reliable non-volatile data storage. Its simple two-wire serial interface also simplifies the design of the overall system.
6. How does the 93LC46/P semiconductor handle data retention and endurance?
The 93LC46/P semiconductor is designed to retain data for an extended period without requiring power. Additionally, it has a high endurance for read and write cycles, making it suitable for frequent data updates in various applications.
7. What are the typical operating conditions for the 93LC46/P semiconductor?
The 93LC46/P semiconductor operates within a specified voltage range, typically from 2.5V to 5.5V, and at a recommended temperature range. It is important to adhere to these operating conditions to ensure proper functionality and reliability.
8. Can the 93LC46/P semiconductor be used in automotive applications?
Yes, the 93LC46/P semiconductor is suitable for use in automotive applications, provided that it meets the required specifications for temperature, voltage, and environmental conditions. Its small form factor and low power consumption make it well-suited for automotive electronics.
9. How can the 93LC46/P semiconductor be programmed and erased?
The 93LC46/P semiconductor can be programmed and erased using a simple two-wire serial interface, which allows for easy integration with microcontrollers or other digital devices. Specific commands and protocols are used to write, read, and erase data in the semiconductor.
10. Are there any special considerations for PCB layout when using the 93LC46/P semiconductor?
When designing the PCB layout for the 93LC46/P semiconductor, it is important to consider signal integrity, power supply decoupling, and proper routing of the serial interface lines to minimize noise and interference. Additionally, attention should be given to the placement of the semiconductor within the overall system for optimal performance.
I hope this information is helpful to you.
93LC46/P Змяненні, ключавыя словы
:
93LC46/P Кошт
93LC46/P Малюнак
93LC46/P Напружанне на выснове
Акцыі: Хуткая праверка каціровак
Мінімальная замова: 1
Змяшчае прадукты серыі "93LC"