IPS511 Infineon Technologies IC MOSFET HS PWR SW 5A TO-220-5
Інтэгральныя схемы (ІС)
Нумар вытворцы:
IPS511
Вытворца:
Катэгорыя прадукцыі:
Апісанне:
IC MOSFET HS PWR SW 5A TO-220-5
Стан RoHs:
Табліцы дадзеных:
IPS511 Табліцы дадзеных(PDF)
Rds уключаны (тып) :
110 mOhm
Інтэрфейс :
On/Off
Абарона ад памылак :
Current Limiting (Fixed), Open Load Detect, Over Temperature
Асаблівасці :
Auto Restart
Канфігурацыя вываду :
High Side
Каэфіцыент - Уваход: Вывад :
1:1
Колькасць выхадаў :
1
Напружанне - нагрузка :
5.5 V ~ 35 V
Напружанне - сілкаванне (Vcc/Vdd) :
Not Required
Пакет / Чахол :
TO-220-5
Пакет прылады пастаўшчыка :
TO-220AB (5-LEAD)
Працоўная тэмпература :
-40°C ~ 150°C (TJ)
серыял :
-
Ток - выхад (макс.) :
1.7A
Тып вываду :
N-Channel
Тып перамыкача :
General Purpose
Тып уводу :
Non-Inverting
Ўпакоўка :
Tube
Частка Статус :
Obsolete
в наличии
18,538
Unit Price:
Звяжыцеся з намі Прапанова
IPS511 Канкурэнтныя кошты
ChipIc мае унікальную крыніцу паставак. Мы можам прапанаваць IPS511 больш
канкурэнтаздольную цану для нашых кліентаў. Вы можаце атрымаць асалоду ад нашым лепшым
сэрвісам, купіўшы ChipIc IPS511. Калі ласка, не саромейцеся звяртацца наконт
лепшай цаны на IPS511. Націсніце, каб атрымаць прапанову
IPS511 Асаблівасці
IPS511 is produced by Infineon Technologies, belongs to PMIC - Пераключальнікі размеркавання харчавання, драйверы нагрузкі.
IPS511 Падрабязная інфармацыя аб прадукцыі
:
IPS511 - гэта PMIC - Пераключальнікі размеркавання харчавання, драйверы нагрузкі, буферныя ўзмацняльнікі, распрацаваныя і
вырабленыя
Infineon Technologies.
IPS511 вытворчасці Infineon Technologies можна набыць на сайце Chipic.
Тут вы можаце знайсці розныя віды электронных дэталяў ад вядучых вытворцаў свету.
IPS511 кампаніі Chipic прайшоў строгі кантроль якасці і адпавядае усім патрабаванням.
Статус запасаў, пазначаны на Chipic, прызначаны толькі для даведкі.
Калі вы не знайшлі запчастку, якую шукаеце, вы можаце звязацца з намі для атрымання дадатковай інфармацыі, такі як колькасць запасаў у табліцы дадзеных IPS511 (PDF), кошт IPS511, Распіноўка IPS511, кіраўніцтва IPS511 і рашэнне на замену IPS511.
IPS511 вытворчасці Infineon Technologies можна набыць на сайце Chipic.
Тут вы можаце знайсці розныя віды электронных дэталяў ад вядучых вытворцаў свету.
IPS511 кампаніі Chipic прайшоў строгі кантроль якасці і адпавядае усім патрабаванням.
Статус запасаў, пазначаны на Chipic, прызначаны толькі для даведкі.
Калі вы не знайшлі запчастку, якую шукаеце, вы можаце звязацца з намі для атрымання дадатковай інфармацыі, такі як колькасць запасаў у табліцы дадзеных IPS511 (PDF), кошт IPS511, Распіноўка IPS511, кіраўніцтва IPS511 і рашэнне на замену IPS511.
IPS511 FAQ
:
1. What is IPS511 and what are its main applications?
IPS511 is a discrete semiconductor device commonly used in power management applications, such as voltage regulation and current control in electronic circuits.
2. What are the key electrical specifications of IPS511?
The key electrical specifications of IPS511 include its maximum voltage rating, current handling capability, on-state voltage drop, and thermal resistance.
3. How does IPS511 compare to other similar semiconductor devices in terms of performance and efficiency?
IPS511 offers competitive performance and efficiency compared to other similar devices, with its unique combination of voltage/current ratings and low on-state resistance.
4. What are the typical operating conditions for IPS511?
IPS511 is typically operated within a specified range of voltage, current, and temperature, ensuring optimal performance and reliability in various applications.
5. What are the recommended mounting and thermal management practices for IPS511?
Proper mounting techniques, such as using appropriate heatsinks and thermal interface materials, are crucial for maintaining the temperature of IPS511 within safe limits during operation.
6. Can IPS511 be used in parallel or series configurations for higher power applications?
Yes, IPS511 can be configured in parallel or series to increase current handling capability or voltage rating, respectively, in high-power applications.
7. What are the common failure modes of IPS511 and how can they be mitigated?
Common failure modes of IPS511 include overcurrent, overvoltage, and thermal overstress. These can be mitigated by implementing proper protection circuits and thermal management strategies.
8. Are there any specific layout considerations when designing a circuit using IPS511?
Careful attention should be given to the layout of the circuit to minimize parasitic effects, optimize current paths, and ensure proper heat dissipation for IPS511.
9. What are the industry standards and certifications relevant to IPS511?
IPS511 may comply with industry standards such as JEDEC, RoHS, and specific application-related certifications, depending on the intended use and market requirements.
10. Where can I find detailed technical documentation and support for IPS511?
Detailed technical documentation, including datasheets, application notes, and support resources for IPS511, can be obtained from the manufacturer's official website or authorized distributors.
IPS511 is a discrete semiconductor device commonly used in power management applications, such as voltage regulation and current control in electronic circuits.
2. What are the key electrical specifications of IPS511?
The key electrical specifications of IPS511 include its maximum voltage rating, current handling capability, on-state voltage drop, and thermal resistance.
3. How does IPS511 compare to other similar semiconductor devices in terms of performance and efficiency?
IPS511 offers competitive performance and efficiency compared to other similar devices, with its unique combination of voltage/current ratings and low on-state resistance.
4. What are the typical operating conditions for IPS511?
IPS511 is typically operated within a specified range of voltage, current, and temperature, ensuring optimal performance and reliability in various applications.
5. What are the recommended mounting and thermal management practices for IPS511?
Proper mounting techniques, such as using appropriate heatsinks and thermal interface materials, are crucial for maintaining the temperature of IPS511 within safe limits during operation.
6. Can IPS511 be used in parallel or series configurations for higher power applications?
Yes, IPS511 can be configured in parallel or series to increase current handling capability or voltage rating, respectively, in high-power applications.
7. What are the common failure modes of IPS511 and how can they be mitigated?
Common failure modes of IPS511 include overcurrent, overvoltage, and thermal overstress. These can be mitigated by implementing proper protection circuits and thermal management strategies.
8. Are there any specific layout considerations when designing a circuit using IPS511?
Careful attention should be given to the layout of the circuit to minimize parasitic effects, optimize current paths, and ensure proper heat dissipation for IPS511.
9. What are the industry standards and certifications relevant to IPS511?
IPS511 may comply with industry standards such as JEDEC, RoHS, and specific application-related certifications, depending on the intended use and market requirements.
10. Where can I find detailed technical documentation and support for IPS511?
Detailed technical documentation, including datasheets, application notes, and support resources for IPS511, can be obtained from the manufacturer's official website or authorized distributors.
IPS511 Змяненні, ключавыя словы
:
IPS511 Кошт
IPS511 Малюнак
IPS511 Напружанне на выснове
Акцыі: Хуткая праверка каціровак
Мінімальная замова: 1
Змяшчае прадукты серыі "IPS5"